How Much Does It Cost to Relocate Washer and Dryer Hookups? [2024 Data]

Normal range: $850 - $1,800

Moving washer/dryer hook-ups costs around $1,200, on average, but your price could fall as low as $500 or reach up to $5,000, depending on a few factors.

How we get this data
A woman doing her laundry at home
Photo: gradyreese / E+ / Getty Images
Alison Kasch
Written by Alison Kasch
Contributing Writer
Updated December 21, 2023
A woman doing her laundry at home
Photo: gradyreese / E+ / Getty Images

Costs might approach $5,000 or more if you’re moving the washer/dryer hookups along with the vent and drain line, but they average around $1,200. Installing a new unit is around $50 to $175 per unit. Your trusty washer and dryer see it all—from your ancient afghan to your freshly-cut pair of homemade jorts. That’s why relocating your washer and dryer is an important task—but the cost will vary depending on the availability of outlets and any plumbing issues.

See the price range for moving washer/dryer hook-ups:
How we get this data
Normal range for U.S.
$850 - $1,800
  • Average
  • $1,200
  • Low end
  • $500
  • high end
  • $5,000
LOWHIGH

Washer and Dryer Hookups Relocation Cost Breakdown

The cost of relocating washer and dryer hookups entails adding several plumbing features, a dryer vent, and electrical outlets. If you’re bringing in a gas-powered dryer, you should factor in the cost to run gas lines as well. You’ll need to consider these expenses in addition to installing the machines themselves.

ProjectAverage Cost
Cut-off valve installation$10–$30 per line
New drain line$360–$1,840
New outlets and circuits$100–$500 per outlet
New gas line$200–$5,000
New dryer vent$100–$1,000
Repairing drywall$300–$1,000
Appliance installation$50–$175

Installing a Washing Machine Cut-Off Valve

A cut-off valve is necessary to stop water supply for your washing machine. Your washing machine cut-off valve will likely cost around $10 to $30 for each line.

Building a Drain Line for the Washer

Relocating your washing machine gets trickier when plumbing costs are involved. And one major plumbing cost to relocate your washer and dryer is building a drain line. Depending on how close it is to the existing plumbing, that price could be anywhere between $360 and $1,840.

Installing Electrical Outlets and Circuits

Your washer should run on a regular 120v outlet, while dryers need high-powered outlets (~240 volts) to receive the correct power supply. The cost to install a new outlet is around $300 if you need a new outlet for the washer, and about $500 if you need a 240-volt plug for the dryer. You also may need to cap an existing gas line, which costs around $125.

Running a Gas Line (Gas Dryers Only)

If you’re installing a gas dryer, you’ll need to factor in the cost to run gas lines to your new laundry room. Prices vary, but a the cost for a new gas line typically falls between $200 to $5,000 or more based on how far you run the lines. Expect to pay around $20 per linear foot.

Dryer Vent Installation

Dryers need a place to push out that hot air, so don’t forget to consider installing a dryer vent. A new dryer vent costs an average of $100, but can go up to $1,000 depending on how long of a vent is needed.

Repairing Drywall

After you finish installing new hookups, you’ll likely have some minor drywall repair needs. Minor drywall repair can cost as low as $100 and your plumber or electrician may even add this to part of their labor cost. Sometimes when moving your washer and dryer you’ll uncover mold or water damage that needs further attention. In these cases, it’s best to call a mold remediation pro to test and suggest the best course of action.

Installing the New Machines

Once you’ve set up everything, you’ll have to think about installing the units themselves. If you’re buying new units, many will include installation in the cost. If that’s not the case, you can find an appliance installation service near you and get it done for about $50 to $175 per unit.

Cost to Relocate Washer and Dryer Hookups by Project Type

Different parts of your home have easier access to plumbing and other utilities, so the cost to move your washer and dryer upstairs will be different from the cost to move them to your garage. Below are a few common choices and their associated costs.

Moving to Another Wall or Room

Shifting your washer and dryer to a new wall in the same room or a new room in the same floor is the most common project. In these cases, you’re likely utilizing existing plumbing and electrical, and possibly only adding new venting or extending the existing pipes. Expect to pay on the lower end of the cost range, closer to $1,000 to $1,500, depending on the existing connections available.

Cost to Move Washer and Dryer Upstairs

The cost to move your washer and dryer upstairs will likely require extending pipes, putting in new faucets, and installing a longer drain line. Depending on your setup, you might pay upwards of $15,000 to make this happen. A large part of this is due to the cost of installing new washer and dryer hookups.

Cost to Move Washer and Dryer to Garage or Basement

The cost to move your washer and dryer to the garage or basement is usually between $1,060 and $4,475. This covers installing the hookups, putting in a new drain line, installing a dryer vent, and adding an outlet. If you need to undertake more construction work, such as redoing the flooring or tiling the walls, you might pay anywhere between $2,000 to $15,000.

Relocating a Washer and Dryer Yourself vs. Hiring a Pro

A modern laundry room
Photo: Erik Isakson / Tetra images / Getty Images

Unless you have proper training, you should get in touch with a professional plumber near you to help you set up the necessary plumbing. Otherwise, you risk catastrophic leaks and a washing machine that won’t cycle correctly (or at all).

The same goes for adding in the proper electrical work. Your plumber may do this, or you will need to phone a local electrician to take care of it. Either way, don’t take matters into your own hands, as you’ll run into electrical dangers that could put your safety or appliances at risk. Especially in a room that sees a lot of water and high heat, the potential risks of electrical shock, water damage, and house fires are high as a result of improper installation.

If you’ve already rolled up your sleeves and want to save where it’s safe to do so, you can install your new washer and dryer with relative ease. You’ll just need a few basic tools, supply lines if they didn’t come with the units, and a zip tie to attach your drain line to the supply lines.

Frequently Asked Questions

The type of contractor to install a washer and dryer connection can be a local handyperson or one who offers plumbing services. You might also need to find an electrician near you to help install the correct outlets.

For a gas dryer, the type of contractor to run a gas line is either a local plumber or an HVAC specialist near you.

Ready to get a quote for your project?
Answer a few questions, compare reviews, and choose the pro you want.
Learn more about our contributor
Alison Kasch
Written by Alison Kasch
Contributing Writer
Alison is a Chicago-based writer who has spent the last seven years focusing her content on everything inside and outside the home.
Alison is a Chicago-based writer who has spent the last seven years focusing her content on everything inside and outside the home.
The homeowners guide to Appliance Repair
From average costs to expert advice, get all the answers you need to get your job done.