Ask Your Question

Angie's List Answers is the trusted spot to ask home improvement and health questions and get answers from service companies, health providers and consumers. For ratings and reviews on companies in your area, search Angie's List.

 
 
or
Top 30 Days Experts
Rank Leader Points*
1 LCD 2480
2 kstreett 240
3 Guest_9020487 110
4 Guest_9190926 105
5 GoldenKid 100
6 ahowell 95
7 KnowledgeBase 95
8 skbloom 80
9 Guest_98024861 70
10 Guest_9311297 70

*Updates every 4 hours

Browse Projects By Category

Question DetailsAsked on 8/27/2014

What should it cost to replace a 400 square foot concrete drive way?

Would it be more cost effective and as durable to seal with asphalt or another layer of concrete?

Do you have the same question? Follow this Question


Voted Best Answer
2
Votes

To overlay,with proper adhesion so it does not peel off, you first need to prepare the surface - typically heavy watercutting or sandblasting for concrete over concrete, or high-pressure presure washing and an asphalt (NOT water based cutback) adhesion coat before asphalt overlay.


Because of the prep cost, a concrete overlay commonly costs more than just tearingit out and replacing it, and if you are replacing it due to cracking and breaking up those cracks will almost always propogate or "reflect" through the new layer too with concrete. Ditto with asphalt overlay, though using a crack-stopper fabric can reduce (but usually not eliminate) that.


If just repairing ice melt/freeze thaw deterioration, a cementatious epoxy overlay can be used, though its life is less (normally) than new concrete. Usually used for limited areas like garage area pad, not entire driveways.


Asphalt overlays over somewhat deteriorated concrete can work well,but if not prepared and high-pressure (about 5000 psi or higher) cleaned to remove ALL deteriorated material, they can peel off because they stuck to deteriorated loose material rather than sound concrete. Again, can cost as much for a 1-1/2 to 2 inch overlay as for a 3-4 inch full replacement by the time you are done, because the prep work is labor intensive.


Even if this is just a surficial deterioration issue, I would talk to several contractors (site visit) about alternatives and let them bid both an overlay and a replacement (or whichever options they are inclined to bid on), then after getting opinions from all three and bids for all options, make your decision. I am pretty confident that total replacement will be both the most recommended and the cheapest, at probably about $2-4/SF for asphalt or 4-6/SF for concrete - commonly nearer the lower than higher range for most jobs and locales. If the overlay and replacement cost is pretty close,I would go with the replacement because overlays over concrete are always somewhat iffy as to how long they will last, especially concrete overlays.


For cost comparison, except in extreme freeze-thaw country, you can figure a concrete drive will last about twice as long as an asphalt one.

Answered 3 years ago by LCD




Related Questions


Terms Of Use
|
Privacy Policy