How Much Does It Cost to Install a Gas Stove? [2024 Data]
Normal range: $300 - $1,000
The average cost to install a gas stove ranges from $300
to $1,000
, with a average of $625
. Costs increase if you need to change your countertop or cabinet configuration or install a gas line.
The average cost to install a gas stove is $625
, ranging from a minimum of $300
to a maximum of $1,000
. A gas stove is a practical tool for any kitchen. It may not be as easy to clean as an electric range, but it heats up much quicker and allows you to adjust the flame to your heart’s desire. If you’re ready to switch to an electric stove, you’ll need a plumber to run a new gas line.
You can expect to pay approximately $15 to $25 per linear foot when installing a gas line. Plumbers typically charge between $75 and $100 per hour for their services. This cost range applies to projects where the stove unit and ventilation system are already in place.
Gas Stove Installation Cost Breakdown
Assuming your home already has the correct fuel for your appliance, you’ll need to install a new gas line to accommodate your new stove. Plumbers install gas lines and are the best equipped to handle this type of job.
The length of this line will have a heavy impact on your material and labor costs. If you’re switching from natural gas to propane, which burns more efficiently and has a lesser environmental impact, this will result in additional expenses as well. Find your gas stove installation cost breakdown below.
Gas Stove
Gas stoves can range anywhere between $300 and $2,200. Features such as wider ranges, digital controls, and double ovens will drive up the price.
Gas Hookup
Plumbers charge anywhere between $45 and $200 per hour, depending on factors like experience level and location. To run a new gas line, it’s best to hire a master plumber for an average cost of $75 to $100 per hour. They are your go-to pros for this job, as they’re the most qualified to install any type of pipe.
Gas Line Installation
The length of a new gas line or the extension of an existing one directly affects the cost of installing a gas stove. A kitchen stove line costs about $20 per linear foot on average, though you’ll often have to pay a minimum charge to have the plumber come out to your home.
Longer gas lines require more materials like pipes, connectors, and fittings, increasing material costs. Additionally, the installation process for longer lines involves more labor, including digging trenches or drilling, which increases labor costs. The complexity of routing through obstacles such as walls or floors can further add to expenses.
Changes to Counters and Cabinets
Modifying counters and cabinets can significantly affect the installation cost of gas stoves. If the existing setup doesn't accommodate the stove's dimensions or gas line connection, alterations like cutting or resizing countertops and cabinets may be necessary. These adjustments demand skilled labor, potentially raising installation costs. Moreover, rerouting gas lines to fit the stove's new location can entail additional expenses.
Repairs to Drywall
When mounting or connecting the stove, it may be necessary to cut openings or create spaces in the wall to accommodate gas lines, vents, or outlets. After the installation, these alterations often require professional drywall repair, including patching, texturing, and painting. These additional tasks increase the overall installation cost due to the need for both skilled labor and materials.
Type of Gas (Propane vs. Natural Gas)
Propane stoves require specialized gas lines, regulators, and connectors, often increasing material expenses compared to natural gas installations. Additionally, propane systems may necessitate the installation of a propane tank, which involves extra labor and materials. Natural gas, on the other hand, typically has existing infrastructure in many homes, reducing installation complexity and costs. Consequently, the choice between propane and natural gas directly influences installation expenses due to the specific equipment and infrastructure required for each gas type.
Gas Line Material
The choice of gas line materials significantly influences the cost of gas stove installation. Traditional black iron pipes, though durable, can be more expensive due to their material cost and labor-intensive installation process, which involves threading and welding. In contrast, flexible materials like corrugated stainless steel tubing (CSST) or copper offer cost savings through easier installation and reduced labor time. However, their initial material cost may be higher. Therefore, the selection of gas line materials directly impacts installation expenses, balancing initial outlay with installation efficiency and longevity.
Installing a Gas Stove DIY vs. Hiring a Pro
Switching from an electric to a gas stove requires a local professional gas plumber—ideally a master plumber with plenty of applicable experience. Working with natural gas lines yourself is incredibly dangerous, as well as illegal in many places. For this to work as a DIY, you’ll need to have gas hookups that match up with your appliance’s fuel type, which is either propane or natural gas.
Even if you already have the proper gas hookups ready to go, though, you should still treat this DIY with extreme caution. Improper installation could lead to a harmful (or even fatal) gas leak. It’s essential to read all instructions carefully and check your work with a gas leak detector. Also, review your appliance’s warranty to ensure you won’t make it null by handling your own installation.
Here are the basic tools and materials you’ll need to hook up a stove to an existing gas line:
Tool | Average Cost |
---|---|
Adjustable wrench | $5 |
Pipe wrench | $8 |
Four-in-one screwdriver | $10 |
Gas leak detector | $25 |
Gas range connector kit | $25–$40 |
Once you finish, it’s a good idea to get a professional plumbing inspection completed to ensure the installation was successful.
Frequently Asked Questions
Many homeowners prefer gas stoves for their ability to cook food much faster than an electric model. They also allow you to easily adjust and fine-tune cooking temperatures on the fly, whereas electric cooktops take a while to heat or cool. Plus, if the power goes out, you’ll still be able to use your stove to cook a meal.
Installing a gas stove can incrementally increase home value. While it may not have the same dramatic impact as a major renovation, it's a valuable asset for many potential buyers, particularly avid home cooks who prefer the precise control and responsiveness of gas burners. A gas stove can enhance a kitchen's functionality and attractiveness, making the property more appealing. However, the extent of the value increase varies depending on factors like the local real estate market, the stove's quality, and overall kitchen condition. So, while not a major game-changer, a gas stove can contribute positively to a home's overall appeal and resale value.
Those switching from an electric stove to a gas stove may lament the loss of its self-cleaning feature. Don’t worry though, you can clean your oven in a few easy steps with some oven cleaner and scrubbing. Bake up a batch of celebratory sugar cookies when you’re finished!